Perfluoromethyl vinyl ether

GREFLINE®

PRODUCT OVERVIEW AND FEATURES

PERFLUOROMETHYL VINYL ETHER (CAS NUMBER: 1187-93-5) IS A HIGH-PERFORMANCE FLUORINATED ORGANIC COMPOUND WITH THE CHEMICAL FORMULA CF3OCF=CF2, AS AN IMPORTANT FLUORINATED MONOMER, ITS UNIQUE PERFLUORINATED STRUCTURE ENDOWS THE POLYMER WITH EXCELLENT HIGH TEMPERATURE RESISTANCE, CORROSION RESISTANCE, AND CHEMICAL STABILITY. IT IS WIDELY USED IN THE SYNTHESIS OF SPECIAL FLUORORUBBER, FLUOROPLASTICS, AND HIGH-END SEALING MATERIALS.

01 EXCELLENT POLYMERIZATION ACTIVITY

AS A FLUORINATED VINYL ETHER MONOMER, IT CAN BE COPOLYMERIZED WITH TETRAFLUOROETHYLENE (TFE), HEXAFLUOROPROPYLENE (HFP), ETC., SIGNIFICANTLY IMPROVING THE FLEXIBILITY, LOW TEMPERATURE RESISTANCE, AND PROCESSABILITY OF THE POLYMER.

02 LOW SURFACE ENERGY AND HYDROPHOBICITY

ENDOW TERMINAL MATERIALS WITH ANTI FOULING, ANTI STICKING, WATERPROOF AND OTHER CHARACTERISTICS, SUITABLE FOR SURFACE COATINGS AND SEALING MATERIALS.

03 HIGH PURITY AND SAFETY

THE IMPURITY CONTENT IS EXTREMELY LOW, MEETING THE REQUIREMENTS OF ELECTRONIC GRADE MATERIALS. LONG SHELF LIFE, GOOD SAFETY AND STABILITY.

MAIN COMPOSITIONS AND PHYSICOCHEMICAL PROPERTIES

MAIN TYPE CLASSIFICATION

TYPE: PREMIUM TYPE, PMVE CONTENT: ≥99.99%

TYPE: TYPE I, PMVE CONTENT: ≥99.5%

TYPE: TYPE II, PMVE CONTENT: ≥98.5%

MAIN APPLICATION

PERFLUOROMETHYL VINYL ETHER (PMVE) AS THE SPECIAL FLUORIC MONOMER HAS WIDE APPLICATIONS IN THE DEVELOPMENT OF NEW-STYLE FLUOROPLASTICS AND FLUOROELASTOMERS (FKM) WITH EXCELLENT INTEGRATIVE PROPERTIES.

COPOLYMERIZED WITH TETRAFLUOROETHYLENE (TFE) TO PRODUCE THERMAL AND CHEMICAL CORROSION RESISTANT PERFLUORO-ELASTOMER (FFKM).

COPOLYMERIZED WITH TFE AND VINYLDENE FLUORIDE (VDF) TO PRODUCE FKM CROSSLINKED WITH PEROXIDE.

SMALL AMOUNT OF PMVE COPOLYMERIZE WITH TFE TO PRODUCE MELTABLE POLYTETRAFLUOROETHYLENE (MFA).

PMVE ALSO IS THE IMPORTANT MATERIAL OF NEW INSECTICIDE NOVALURON.

APPLICATION INSTRUCTION AND NOTICE

BECAUSE OF THE LOW BOILING POINT, PMVE IS IN GAS FORM UNDER NORMAL TEMPERATURES AND STORED IN STEEL CYLINDER IN GAS-LIQUID PHASES.

THEREFORE, SPECIFIC METAL TUBE AND JOINT SHOULD BE CONNECTED ONTO POLYMERIZATION REACTOR AND OTHER EQUIPMENTS WHEN USED. LEAKAGE TEST WITH PRESSURE, EXTRACTION AND AIR REPLACEMENT ARE REQUIRED FOR CONNECTING PIPE BEFORE THE STEEL CYLINDER VALVE OPENED.

THIS PRODUCT IS IRRITANT TO HUMAN EYES, RESPIRATORY SYSTEM AND SKIN, SO IT IS SUGGESTED TO AVOID A DIRECT CONTACT AT MOST EXTENT. IN CASE OF CONTACT WITH EYES, GENTLY FLUSH WITH PLENTY OF WATER. IF FEEL UNCOMFORTABLE WITH SMELL, PLEASE GO FOR HOSPITAL IN TIME.

PACKAGING, STORAGE AND TRANSPORTATION

THIS PRODUCT IS PACKAGED WITH STEEL CYLINDER IN GAS-LIQUID PHASES, THE STEEL CYLINDER SIZE IS 47L, 400L, 800L.

STORED IN SHADE AND DRY ENVIRONMENT AND WELL-VENTILATED INDOOR WAREHOUSE. PROHIBITED TO BE EXPOSED TO THE SUN OR CLOSE TO FLAMMABLE PLACES.

IT SHOULD NOT BE STORED IN THE SAME WAREHOUSE WITH OXIDIZING GASES. TRANSPORTED AS ORDINARY HAZARDOUS MATERIAL.

ONCE EXCEEDING THE STORAGE PERIOD (2 YEARS), PERFORMANCE SHALL BE TESTED UPON THE STANDARD AND CYLINDERS CAN ONLY BE USED AFTER QUALIFICATION.