Plastics & flame retardants
Modified PPE
Modified Plastics
09
Modified Plastics
Modified PPE
MATERIAL OVERVIEW
GREPLAS®
Typical Applications
Automotive: fuse boxes, battery pack housings, PV junction boxes, battery brackets, etc.
Electronic and electrical: sockets, charger housings, fuses, switch relays, integrated circuit box housings, etc.
Fuse box, socket, charger housing, battery pack housing
| Properties | Standard Test Method | Unit | PPE/PS Alloy | |||
| GREPLAS® | GREPLAS® | GREPLAS® | GREPLAS® | |||
| Physical Properties | ||||||
| Density | ISO 1183 | g/cm3 | 1.06 | 1.10 | 1.26 | 1.32 |
| Molding Shrinkage (3.2 mm) | ISO 294-4 | % | 0.4-0.7 | 0.4-0.7 | 0.2-0.4 | 0.2-0.4 |
| Melt Flow Rate (280 ℃, 5 kg) | ISO 1133-1 | g/10min | 12 | 13 | — | — |
| Glass Fiber Content | — | — | — | — | 20 | 30 |
| Tensile Strength | ||||||
| Flexural Strength | MPa | ISO 178 | 190 | 250 | 260 | 340 |
| Flexural Modulus | MPa | ISO 178 | 5800 | 9000 | 8500 | 15000 |
| Notched Izod Impact Strength (23℃) | kJ/m2 | ISO 180 | 8 | 14 | 15 | 18 |
| Notched Izod Impact Strength (-40℃) | kJ/m2 | ISO 180 | — | — | — | — |
| Unnotched Charpy Impact Strength (23℃) | kJ/m2 | ISO 179 | 65 | 85 | 80 | 90 |
| Heat Deflection Temperature (1.80 MPa) | ||||||
| Melting Temperature | ℃ | ISO 11357-1/-3 | 263 | 263 | 263 | 263 |
| Flame Rating (1.6 mm) | ||||||
| Flame Rating (0.8 mm) | class | UL 94 | — | — | — | — |
| Glow-Wire Flammability Index (GWFI) 2.0 mm | ℃ | IEC60695-2-12 | — | — | — | — |
| Comparative Tracking Index (CTI) | ||||||
| Relative Permittivity (1 MHz) | IEC 60250 | — | 2.6 | 2.7 | — | — |
| Dissipation Factor (1MHz) | IEC 60250 | — | 0.001 | 0.004 | — | — |
| Volume Resistivity | IEC 60093 | Ohm·cm | 1.00E+16 | 1.00E+16 | 1.00E+16 | 1.00E+16 |
| Properties | Standard Test Method | Unit | PPE/PA Alloy | ||||
| GREPLAS® | GREPLAS® | GREPLAS® | GREPLAS® | GREPLAS® | |||
| Physical Properties | |||||||
| Density | ISO 1183 | g/cm3 | 1.08 | 1.08 | 1.10 | 1.07 | 1.24 |
| Molding Shrinkage (3.2 mm) | ISO 294-4 | % | 1.1-1.4 | 1.1-1.4 | 0.9-1.2 | 1.1-1.4 | 0.3-0.6 |
| Melt Flow Rate (280 ℃, 5 kg) | ISO 1133-1 | g/10min | 20 | 12 | 10 | 13 | — |
| Glass Fiber Content | — | — | — | 30 | — | — | — |
| Tensile Strength | |||||||
| Flexural Strength | MPa | ISO 178 | 60 | 52 | 55 | 52 | 130 |
| Flexural Modulus | MPa | ISO 178 | 50 | 80 | 20 | 100 | 3 |
| Notched Izod Impact Strength (23℃) | kJ/m2 | ISO 180 | 80 | 70 | 80 | 70 | 180 |
| Notched Izod Impact Strength (-40℃) | kJ/m2 | ISO 180 | 2200 | 1900 | 2100 | 1900 | 5800 |
| Unnotched Charpy Impact Strength (23℃) | kJ/m2 | ISO 179 | 25 | 45 | 10 | 55 | 10 |
| Heat Deflection Temperature (1.80 MPa) | |||||||
| Melting Temperature | ℃ | ISO 11357-1/-3 | 185 | 180 | 185 | 175 | 240 |
| Flame Rating (1.6 mm) | |||||||
| Flame Rating (0.8 mm) | class | UL 94 | HB | HB | V-0 | HB | HB |
| Glow-Wire Flammability Index (GWFI) 2.0 mm | ℃ | IEC60695-2-12 | — | — | — | — | — |
| Comparative Tracking Index (CTI) | |||||||
| Relative Permittivity (1 MHz) | IEC 60250 | — | 2.7 | 2.7 | — | 2.7 | 2.8 |
| Dissipation Factor (1MHz) | IEC 60250 | — | 0.025 | 0.025 | — | 0.025 | — |
| Volume Resistivity | IEC 60093 | Ohm·cm | 1.00E+16 | 1.00E+16 | 1.00E+16 | 1.00E+16 | 1.00E+16 |
Product inquiry
Send the model code and we will confirm the details.
Quote the series above together with the quantity, application and required material behavior.