Plastics & flame retardants

Modified PC and alloys

Modified Plastics

Modified PC and alloys

MATERIAL OVERVIEW

GREPLAS® Modified PC » Reinforced PC: 30% glass-fiber reinforced » Flame-Retardant PC: 0%-30% glass-fiber reinforced, halogen-free flame retardant » PC alloys: PC/ABS alloy, PC/PBT alloy, PC/ASA alloy

Typical Applications

Electronic and electrical: housings, switch panels, LED lighting, backlight module reflectors, etc.

Automotive: automotive components, interior and exterior trim, vehicle lights, etc.

Window switch panel, charging gun housing, battery pack isolation plate, sports helmet

			Reinforced PC	Flame Retardant PC
Properties	Test Method	Unit	GREPLAS®C0016S	GREPLAS®C2000	GREPLAS®C2000NH	GREPLAS®FRPCVG10B	GREPLAS®C214
Physical Properties
Density	ISO 1183	g/cm3	1.43	1.20	1.18	1.31	1.35
Molding Shrinkage (3.2 mm)	ISO 294-4	%	0.2-0.4	0.5-0.7	0.4-0.7	0.2-0.4	0.2-0.4
Melt Flow Rate (300 ℃, 1.2 kg)	ISO 1133-1	g/10min	—	12	13	—	—
Melt Flow Rate (250 ℃, 5 kg)	ISO 1133-1	g/10min	—	—	—	—	—
Filler Content	ISO 3451-1	%	30	—	—	10	20
Mechanical Properties
Tensile Strength	ISO 527-2	MPa	120	65	60	80	105
Elongation at Break	ISO 527-2	%	2	120	120	2	2
Flexural Strength	ISO 178	MPa	180	90	85	120	160
Flexural Modulus	ISO 178	MPa	7500	2200	2100	4000	6000
Notched Charpy Impact Strength (23℃)	ISO 179	kJ/m2	15	70	—	12	9
Notched Izod Impact Strength (23℃)	ISO 180	kJ/m2	14	65	67	10	8
Notched Izod Impact Strength (-30℃)	ISO 180	kJ/m2	—	—	55	—	—
Thermal Properties
Heat Deflection Temperature (1.80 MPa)	ISO 75-2/A	℃	140	125	125	125	140
Heat Deflection Temperature (0.45 MPa)	ISO 75-2/B	℃	—	135	—	—	—
Flame Rating
Flame Rating (1.6 mm)	UL 94	class	HB	V-0	V-0	V-0	V-0
Electrical Properties
Volume Resistivity	IEC 60093	Ohm·cm	1.00E+15	1.00E+15	1.00E+15	1.00E+15	1.00E+15
Surface Resistivity	IEC 60093	Ohm	1.00E+14	1.00E+14	1.00E+14	1.00E+14	1.00E+14

Properties	Test Method	Unit	PC/ABS Alloy					PC/PBT Alloy		PC/ASA Alloy
Properties	Test Method	Unit	GREPLAS®Q084	GREPLAS®Q087	GREPLAS®Q087HF	GREPLAS®Q186	GREPLAS®Q2087	GREPLAS®QB088	GREPLAS®QB086	GREPLAS®QA086
Physical Properties
Density	ISO 1183	g/cm3	1.11	1.14	1.14	1.19	1.18	1.21	1.22	1.14
Molding Shrinkage (3.2 mm)	ISO 294-4	%	0.5-0.8	0.5-0.8	0.5-0.8	0.5-0.7	0.4-0.7	0.5-0.8	0.7-1.1	0.5-0.8
Melt Flow Rate (300 ℃, 1.2 kg)	ISO 1133-1	g/10min	—	—	—	—	—	—	—	—
Melt Flow Rate (250 ℃, 5 kg)	ISO 1133-1	g/10min	17	12	20	15	22	17	20	17
Filler Content	ISO 3451-1	%	—	—	—	—	—	—	—	—
Mechanical Properties
Tensile Strength	ISO 527-2	MPa	50	55	55	55	60	60	53	50
Elongation at Break	ISO 527-2	%	50	80	100	50	80	100	50	80
Flexural Strength	ISO 178	MPa	80	80	80	80	90	85	80	75
Flexural Modulus	ISO 178	MPa	2200	2200	2300	2300	2500	2300	2100	2200
Notched Charpy Impact Strength (23℃)	ISO 179	kJ/m2	—	—	—	—	50	—	—	—
Notched Izod Impact Strength (23℃)	ISO 180	kJ/m2	45	60	50	50	45	65	60	55
Notched Izod Impact Strength (-30℃)	ISO 180	kJ/m2	—	—	—	—	—	—	—	—
Thermal Properties
Heat Deflection Temperature (1.80 MPa)	ISO 75-2/A	℃	90	105	105	105	90	90	80	105
Heat Deflection Temperature (0.45 MPa)	ISO 75-2/B	℃	110	127	127	125	102	105	100	125
Flame Rating
Flame Rating (1.6 mm)	UL 94	class	HB	HB	HB	V-0	V-0	HB	HB	HB
Electrical Properties
Volume Resistivity	IEC 60093	Ohm·cm	1.00E+15	1.00E+15	1.00E+15	1.00E+15	1.00E+15	1.00E+15	1.00E+15	1.00E+15
Surface Resistivity	IEC 60093	Ohm	1.00E+14	1.00E+14	1.00E+14	1.00E+14	1.00E+14	1.00E+14	1.00E+14	1.00E+14

← Back to Modified Plastics Request information

Product inquiry

Send the model code and we will confirm the details.

Quote the series above together with the quantity, application and required material behavior.

Send an inquiry