Plastics & flame retardants
Modified PA6
Modified Plastics
09
Modified Plastics
Modified PA6
MATERIAL OVERVIEW
GREPLAS®
Typical Applications
Automotive: high-voltage connectors, battery pack components, cooling fans, accelerator pedals, intake manifolds, engine covers, igniter housings, MCB coil bobbins, etc.
Electronic and electrical: power sockets, push-button switches, molded-case circuit breakers, power tool housings, etc.
Gas meter housing, air switch, intake manifold, connector clip
| Properties | Unit | Test Method | Reinforced PA6 | |
| GREPLAS® | GREPLAS® | |||
| Density | g/cm3 | ISO 1183 | 1.23 | 1.27 |
| Water Absorption | % | ISO 62 | 2.1 | 2 |
| Filler Content | % | ISO 3451-4 | 15 | 20 |
| Molding Shrinkage | % | ISO 294-4 | 0.8-1.2 | 0.7-1.1 |
| Tensile Strength | MPa | ISO 527-2 | 110 | 140 |
| Flexural Strength | MPa | ISO 178 | 145 | 200 |
| Flexural Modulus | MPa | ISO 178 | 5000 | 6000 |
| Notched Izod Impact Strength (23℃) | kJ/m2 | ISO 180 | 7 | 15 |
| Unnotched Charpy Impact Strength (23℃) | kJ/m2 | ISO 179 | 65 | 70 |
| Heat Deflection Temperature (1.80 MPa) | ℃ | ISO 75-2/A | 190 | 185 |
| Melting Temperature | ℃ | ISO 11357-1/-3 | 221 | 221 |
| Flame Rating (1.6 mm) | class | UL 94 | HB | HB |
| Flame Rating (0.8 mm) | class | UL 94 | — | — |
| Glow-Wire Flammability Index (GWFI) 2.0 mm | ℃ | IEC60695-2-12 | — | — |
| Comparative Tracking Index (CTI) | V | IEC 30112 | — | — |
| Surface Resistivity | Ohm.cm | IEC 60093 | 1.00E+14 | 1.00E+15 |
| Volume Resistivity | Ohm | IEC 60093 | 1.00E+13 | 1.00E+14 |
| Properties | Unit | Test Method | Reinforced PA6 | Flame-Retardant PA6 | ||||
| GREPLAS® | GREPLAS® | GREPLAS® | GREPLAS® | GREPLAS® | GREPLAS® | |||
| Density | g/cm3 | ISO 1183 | 1.36 | 1.53 | 1.7 | 1.56 | 1.38 | 1.16 |
| Water Absorption | % | ISO 62 | 1.8 | 1.5 | 0.8 | 1.7 | 1.7 | 2.2 |
| Filler Content | % | ISO 3451-4 | 30 | 45 | 60 | 30 | 30 | — |
| Molding Shrinkage | % | ISO 294-4 | 0.5-0.8 | 0.2-0.5 | 0.1-0.4 | 0.2-0.6 | 0.4-0.7 | 1.2-1.5 |
| Tensile Strength | MPa | ISO 527-2 | 165 | 205 | 220 | 145 | 130 | 65 |
| Flexural Strength | MPa | ISO 178 | 235 | 300 | 350 | 220 | 200 | 100 |
| Flexural Modulus | MPa | ISO 178 | 8300 | 11000 | 17000 | 9000 | 9000 | 3000 |
| Notched Izod Impact Strength (23℃) | kJ/m2 | ISO 180 | 20 | 18 | 15 | 15 | 14 | 5 |
| Unnotched Charpy Impact Strength (23℃) | kJ/m2 | ISO 179 | 90 | 70 | 70 | 65 | 65 | 80 |
| Heat Deflection Temperature (1.80 MPa) | ℃ | ISO 75-2/A | 205 | 210 | 210 | 195 | 210 | 60 |
| Melting Temperature | ℃ | ISO 11357-1/-3 | 221 | 221 | 221 | 221 | 221 | 221 |
| Flame Rating (1.6 mm) | class | UL 94 | HB | HB | HB | V-0 | V-0 | V-0 |
| Flame Rating (0.8 mm) | class | UL 94 | — | — | — | — | — | V-0 |
| Glow-Wire Flammability Index (GWFI) 2.0 mm | ℃ | IEC60695-2-12 | — | — | — | 960 | 960 | 960 |
| Comparative Tracking Index (CTI) | V | IEC 30112 | — | — | — | 275 | 575 | 600 |
| Surface Resistivity | Ohm.cm | IEC 60093 | 1.00E+15 | 1.00E+14 | 1.00E+14 | 1.00E+14 | 1.00E+15 | 1.00E+14 |
| Volume Resistivity | Ohm | IEC 60093 | 1.00E+14 | 1.00E+13 | 1.00E+13 | 1.00E+13 | 1.00E+14 | 1.00E+13 |
Product inquiry
Send the model code and we will confirm the details.
Quote the series above together with the quantity, application and required material behavior.